If yes, dampen the cotton swab or lint-free cloth with distilled water.ĥ. Next, check if the metal contacts of the ink cartridges are dirty. Check for clogged vents and clean them using the pin.Ĥ. The vent areas are located next to HP’s logo on the top portion of the ink cartridges.ģ. Look for the vent areas on each cartridge and examine them. A clean and dry cotton swab and lint-free clothĢ.Distilled water (Tap water is NOT recommended as it can damage your ink cartridges.).To clean the contacts and vents of your ink cartridges, prepare the following: Try to add the printer again, and then continue to the next step.Ĭlick the Use or Print Using menu, and then select AirPrint or the printer name to complete the setup.1. If your printer is not listed in the Add Printer or Scanner window, make sure the printer is connected to the same wireless network as your Mac.
HOW TO CONNECT HP 3520 PRINTER TO WIRELESS NETWORK PLUS
If your printer is not listed, click the plus sign, click Add Printer or Scanner, click the name of your printer, and then continue to the next step. Click the printer name, click the minus sign to delete the printer, click the plus sign, click Add Printer or Scanner, click the printer name and then continue to the next step. If your printer is listed, remove and re-add the printer to confirm it is set up correctly. If the light is blinking, move the printer close to your wireless router, press the Wi-Fi Protected Setup (WPS) button on the router, and then wait until the wireless light is solid.Ĭlick the Apple menu, click System Preferences, and then click Print & Scan or Printers & Scanners.Ĭheck if your printer name displays in the Printers list with Bonjour or Bonjour Multifunction as the Kind, and then do one of the following steps. If the wireless light is on and solid, the printer is connected to the network.
Printers without displays: Press the Wireless button to turn on the wireless radio. Printers with touchscreen or LCD menu displays: On the printer, select the Setup, Network, or Wireless menu, select Wireless Setup Wizard, and then follow the on-screen instructions to connect the printer. Steps to connect vary by printer control panel type. If Wireless Setup is not listed, continue with the method to add the printer through System Preferences.įigure : Wireless Setup tool in HP UtilityĪdd the printer through System Preferences:Ĭonnect the printer to the network.
Open Finder, click Go in the top menu bar, click Applications, double-click the HP folder, and then double-click HP Utility.įrom the All Settings tab, click Wireless Setup to launch the utility.
The printer only supports 2.4 GHz network.Ĭhange the connection type through HP Utility software, or add the wireless printer through System Preferences. Please click “ Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.Ĭlick the “ Kudos, Thumbs Up " on the bottom right to say “Thanks” for helping Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.Īnd, Welcome to the HP Support Community. If you were unable to press the WPS button within that timeframe, attempt these steps again. The printer stops searching for a WPS connection two minutes after the wireless button is pressed. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started. The Edge lighting flashes blue to indicate the printer is in WPS mode. HP Tango printers: Press and hold the Wireless and Power buttons on the back of the printer for 5 seconds. On the printer control panel, press and hold the Wireless button for at least 3 seconds or until the wireless light starts to flash. If the printer is in sleep mode, press the Cancel button on the control panel. If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app. Locate the WPS button on your router, but do not press it yet. Use WPS to connect the printer to your wireless network.
0 kommentar(er)
